Thursday, February 13, 2014

Around the Woodshop 2010

Wood Turnings, Web Sites and Low-Angle Block Planes

The first week of 2010 has come and gone and Im happy to say that the world didnt end. Whew~ Happy new year indeed!
Things around the wood shop have been as busy as ever with cut lists being assembled and designs coming out of the wood work. Im working on a few new commissions and have been ordering some wood and finalising my designs. Its been an exciting few weeks and I cant wait to start making some shavings!
In my last post I featured my new treadle lathe from CME Handworks Inc. in Palos Heights, IL. and Im delighted to say that Ive been turning away. Just with some practice cuts, getting the feel and the rhythm of the process Ive been walking around with a bit of a limp lately! The lathe is quite comfortable and no issues at all to report.
Ill post some new information on the lathe again in the coming weeks but wanted to let you know that Ive asked a close friend of mine from Cape Breton to write some articles on wood turning for me. My first official guest blogger is Mike Morrison and hes just finishing off his first article for you. Mike and I have been playing music together for almost 20 years (jumpins how time flies) and he too is a very accomplished craftsman. He builds custom furniture and turns beautiful wood projects so instead of me trying to fake my way through the learning curves of wood turning, Ive asked him to share some knowledge. When people search the internet looking for information on wood turning theyll no doubt stumble over here and I wanted to be able to present some viable and accurate information about getting started in wood turning. Ill share with you my own developments as I go but felt there should be content here from someone with experience in the field. I hate it when I visit wood working sites and watch some guy pretend to know what hes doing with a certain hand tool or technique. I dont ever want to be that guy so thats why Ive asked an experienced turner to share some thoughts.
Mikes first post should be up in a day or two so stay tuned for that.

In other wood shop news I just finished an article for Canadian Woodworking Magazine- I reviewed four low-angle block planes and if youre interested in finding out my thoughts on them youll have to pick up issue #65, the april/may issue. The four planes reviewed were the new Stanley SW 60 1/2, the Veritas low-angle block plane, the 60 1/2 by Lie Nielsen and the new DX60 by Veritas. It was fun test driving these tools and you may or may not be surprised at what I found.
Besides that, the new web site ( www.theunpluggedwoodshop.com ) is almost complete and will be launched very soon. There youll have access to all of my blogs with additional content from Made by Hand. Expanded galleries, full Sketch-up models and free down-loadable bench plans of all six projects will be available. Well also have a Readers Gallery where people can share pictures and thoughts of their own on the book projects.
Im looking forward to another busy year and I hope youll be a part of it to share and enjoy all of these things working wood.
Cheers!

No comments:

Post a Comment