Showing posts with label made. Show all posts
Showing posts with label made. Show all posts
Wednesday, February 12, 2014
Hand Made Modern Take 3
A Fall Front Desk in Walnut
O.k. so my last few blogs have been about other peoples handy work, hand tools and the like and Im happy to say that Im back in the wood shop working again on my own projects.
These last few weeks have been busy with life outside of the wood shop so itll be great to make some shavings again. Im working on a new piece that follows in the realm of the hand made modern line Id been designing over the past year. The first was the walnut entertainment cabinet and the second the walnut and aluminum sideboard. This new piece is also made from solid walnut with an interesting take on some through dovetails Ive been calling a finger tail split... Its basically a technique where I cut wide through dovetails as per normal procedure and then split each one again with a finger joint. It makes for a unique look but can be a little tricky to execute. The photo shows the main carcass dry fit together with the door panel glued up in the foreground. The upper main carcass is a basic box with a fitted interior secretary incorporating drawers and shelves. The door panel will have bread board face and the cabinet will have a rabbeted back dust panel. The leg frame will really be the component that transforms this piece from a simple dovetailed box and draw it into a more, Mid-Century Modern vein. (at least thats the plan on paper) Funny how things can change when you start to get into the grain.
Ill be posting some more details as I go so stay tuned...
Work really does make life sweet!
Read More..
O.k. so my last few blogs have been about other peoples handy work, hand tools and the like and Im happy to say that Im back in the wood shop working again on my own projects.These last few weeks have been busy with life outside of the wood shop so itll be great to make some shavings again. Im working on a new piece that follows in the realm of the hand made modern line Id been designing over the past year. The first was the walnut entertainment cabinet and the second the walnut and aluminum sideboard. This new piece is also made from solid walnut with an interesting take on some through dovetails Ive been calling a finger tail split... Its basically a technique where I cut wide through dovetails as per normal procedure and then split each one again with a finger joint. It makes for a unique look but can be a little tricky to execute. The photo shows the main carcass dry fit together with the door panel glued up in the foreground. The upper main carcass is a basic box with a fitted interior secretary incorporating drawers and shelves. The door panel will have bread board face and the cabinet will have a rabbeted back dust panel. The leg frame will really be the component that transforms this piece from a simple dovetailed box and draw it into a more, Mid-Century Modern vein. (at least thats the plan on paper) Funny how things can change when you start to get into the grain.
Ill be posting some more details as I go so stay tuned...
Work really does make life sweet!
Friday, January 24, 2014
More on Shop Made Tools
From the Unplugged Woodshop
In my last post I featured the new Large Spokeshave from Veritas tools here in Canada. The fact that I had an idea for a tool very similar in design to this makes me pleased that a company like Veritas is now manufacturing it. Its on my short list of tools to buy. Thinking on this shop made tool line I decided to look back through my shop notebooks over the past two years and found about a dozen different design ideas Ive come up with. Nothing in there thatll solve Global Warming; who am I kidding, it wouldnt even draw a parade of rats behind me! Oh well...what is in there are some pretty cool ideas for some work shop aids and bench top appliances. A couple of neat new tool ideas and a few more new designs. I tend to write allot while Im still waking up at 4:30 a.m. when I usually start my day, so I can sometimes forget what the hell I wrote from one day to the next! Things get forgotten about and later found and fresh again. That said, itll be interesting to follow through on some of these ideas and build myself some prototypes. Ill keep you posted when I get around to it...put it on the long-list so to speak.
Making tools is a ton of fun and it really helps you understand the angles, bevels and reasons why some planes can chatter and others can run on so smoothly. Why one saw cuts and the other tears. What makes a mallet feel good in your hand? One of the first tools I made in recent years was the Lee Valley spokeshave kit; a Christmas gift from my wife it really covered allot of good workshop techniques. From dimensioning wood to super accurate lay-out. Understanding angles and final shaping and finishing. From there I made a couple of hand planes and some sanding planes,
(readers of Fine Woodworking magazine may remember my Tip of the Month a few issues ago-the sanding planes pictured above.) a mallet and hammer and a little bow-saw my father in law cracked in half last year while limbing an old apple tree! My point is this: Try out new things in your shop whenever you can and time permits. Making your own tools and workshop aids is a great learning exercise for any woodworker at any level.
Try the link on the side bar for www.toolmakingart.com
youll find lots of tool making inspiration there.
Another wealth of tool making information is: www.norsewoodsmith.com
Speaking of tool making and workshop appliances, due to all of the feedback, traffic and e-mails I get about wooden tool boxes, Im going to offer a few for sale. Ill probably only have time to build six or so..itll be first come first serve. In my next blog Ill feature some of the design elements and show some of the tool chests unique features.
A Cabinetmakers Toolchest.
Read More..
In my last post I featured the new Large Spokeshave from Veritas tools here in Canada. The fact that I had an idea for a tool very similar in design to this makes me pleased that a company like Veritas is now manufacturing it. Its on my short list of tools to buy. Thinking on this shop made tool line I decided to look back through my shop notebooks over the past two years and found about a dozen different design ideas Ive come up with. Nothing in there thatll solve Global Warming; who am I kidding, it wouldnt even draw a parade of rats behind me! Oh well...what is in there are some pretty cool ideas for some work shop aids and bench top appliances. A couple of neat new tool ideas and a few more new designs. I tend to write allot while Im still waking up at 4:30 a.m. when I usually start my day, so I can sometimes forget what the hell I wrote from one day to the next! Things get forgotten about and later found and fresh again. That said, itll be interesting to follow through on some of these ideas and build myself some prototypes. Ill keep you posted when I get around to it...put it on the long-list so to speak.Making tools is a ton of fun and it really helps you understand the angles, bevels and reasons why some planes can chatter and others can run on so smoothly. Why one saw cuts and the other tears. What makes a mallet feel good in your hand? One of the first tools I made in recent years was the Lee Valley spokeshave kit; a Christmas gift from my wife it really covered allot of good workshop techniques. From dimensioning wood to super accurate lay-out. Understanding angles and final shaping and finishing. From there I made a couple of hand planes and some sanding planes,
(readers of Fine Woodworking magazine may remember my Tip of the Month a few issues ago-the sanding planes pictured above.) a mallet and hammer and a little bow-saw my father in law cracked in half last year while limbing an old apple tree! My point is this: Try out new things in your shop whenever you can and time permits. Making your own tools and workshop aids is a great learning exercise for any woodworker at any level.
Try the link on the side bar for www.toolmakingart.com
youll find lots of tool making inspiration there.
Another wealth of tool making information is: www.norsewoodsmith.com
Speaking of tool making and workshop appliances, due to all of the feedback, traffic and e-mails I get about wooden tool boxes, Im going to offer a few for sale. Ill probably only have time to build six or so..itll be first come first serve. In my next blog Ill feature some of the design elements and show some of the tool chests unique features. A Cabinetmakers Toolchest.
Subscribe to:
Posts (Atom)